كتالوج المنتجات

01

أدوات التثبيت

براغي وصواميل وحلقات ومثبِّتات بمعايير مترية وإنجليزية.

أدوات التثبيت
الصنف	المادة / الدرجة	نطاق المقاسات	السنّة / التشطيب	نقاط الفحص
Hex Bolt	Carbon or stainless steel; grade to be confirmed	M6 – M24; length chosen to suit the joint thickness	Metric thread; zinc plated or plain on request	Dimensions, tolerance, go/no-go thread gauge, material grade
Hex Nut	Carbon or stainless steel, grade matched to the bolt	M6 – M24; other sizes on request	Metric thread form; coating confirmed per project	Across-flats, thickness, thread and bolt compatibility
Flat Washer	Carbon or stainless steel, hardness to your requirement	Suits M4 – M24; ID, OD and thickness to be confirmed	Standard or oversized (fender) OD; finish optional	Dimensions, flatness, burrs and hardness
Spring Lock Washer	Spring steel or stainless; grade to be confirmed	Suits M4 – M20; gap and section to be agreed	Coating to your requirement; no anti-loosening performance assumed	Dimensions, spring load, gap and surface condition
Self-tapping Screw	Carbon or stainless steel, heat treatment verified by sample	Diameter 3.5 – 6.3 mm; length to be agreed	Hex or pan head; thread form selected by substrate	Head form, thread, driving behaviour and coating
Drywall Screw	Carbon steel; heat treatment and surface data to be confirmed	Diameter 3.5 / 3.9 / 4.2 mm, length 25 – 75 mm	Coarse or fine thread, selected for timber or metal studs	Point, head, driving and breakage behaviour
Wood Screw	Carbon or stainless steel; grade to be confirmed	Diameter 3 – 6 mm, length 20 – 100 mm	Countersunk or pan head; drive type matched to the timber	Thread, head, pilot-hole condition and driving
Expansion Anchor	Steel sleeve or stud anchor; grade to be confirmed	M6 – M16; length and embedment depth to be agreed	Selected against substrate, edge distance and load	Pull-out data, dimensions, installation and substrate condition
Nylon Wall Plug	Nylon or other polymer; actual material to be confirmed	Outer diameter 6 / 8 / 10 / 12 mm	Matched to the screw, hole diameter and wall type	Dimensions, expansion, pull-out and ageing data
Blind Rivet	Aluminium body with steel mandrel, or all stainless; combination to be agreed	Diameter 3.2 / 4.0 / 4.8 mm; length to be agreed	Head style and grip range selected by sheet thickness	Grip range, setting, mandrel and material
Threaded Rod	Carbon or stainless steel; grade to be confirmed	M6 – M24; 1 / 2 / 3 m lengths commonly requested	Pitch, coating, cut ends and matching nuts to be agreed	Straightness, thread, length and grade
U Bolt	Carbon or stainless steel; grade to be confirmed	Rod M6 – M16; inside width and height to be agreed	Matched to the pipe OD; nuts and washers quoted separately	Bend dimensions, thread and completeness of fittings

ملاحظات الاختيار: تُؤكَّد الخطوة ودرجة المقاومة والطلاء حسب الطلب، لا من الصورة.
التعبئة: علبة داخلية أو كيس مع كرتون خارجي؛ العدد أو الوزن حسب طلبك.

02

الأدوات اليدوية والقياس

مطارق وأطقم مفاتيح ومآخذ وكماشات وقواطع وأدوات قياس.

افتح القسم

الأدوات اليدوية والقياس
الصنف	المادة / البنية	نطاق المقاسات	التجهيز / الاستخدام	نقاط الفحص
Claw Hammer	Steel head; timber or fibreglass handle on request	Head approx. 8 / 16 / 20 oz	Handle length, striking face and claw profile verified by sample	Head fixing, grip, hardness and surface
Combination Wrench Set	Chrome vanadium or equivalent; grade to be confirmed	Metric 6 – 24 mm; number of pieces to be agreed	Open end plus ring; sizes matched to the work at hand	Open jaw, ring fit, hardness and surface
Adjustable Wrench	Steel body; dipped or moulded handle optional	6 / 8 / 10 / 12 inch	Max jaw opening, handle length and access chosen to suit	Jaw parallelism, adjustment play and load bearing
Socket Set	Steel sockets; material and hardness to be confirmed	1/4 / 3/8 / 1/2 inch drive	Metric sockets, ratchet and extensions per the agreed list	Size fit, ratchet action, torque and completeness
Screwdriver Set	Steel shank; plastic or soft-grip handle	Slotted and Phillips; length and tip size to be agreed	Standard range only — not offered as insulated tools unless specified	Tip size, hardness, handle torque
Combination Pliers	Steel body; heat treatment and grip to be confirmed	6 / 7 / 8 inch	Gripping, bending and cutting capacity verified by sample	Cutting edges, joint, grips and cut test
Long Nose Pliers	Steel body; material and heat treatment to be confirmed	6 / 8 inch	Straight or bent nose; jaw length and opening to be agreed	Jaw alignment, joint and cutting edge
Diagonal Cutter	Steel head; edge hardness to be confirmed	5 / 6 / 7 inch	Usable wire type and cutting diameter must be proven on a sample	Edge closure, cutting and grip
Pipe Wrench	Steel or cast body; confirmed by sample	10 / 12 / 14 / 18 inch	Jaw range matched to pipe diameter; not a universal load rating	Teeth, adjustment, handle and bite
Measuring Tape	Steel blade; ABS or rubberised case	3 / 5 / 7.5 / 10 m	Blade width, lock and metric/imperial graduation to be agreed	Reading accuracy, hook, retraction and scale durability
Spirit Level	Aluminium profile body; vial construction to be confirmed	300 / 600 / 1000 mm	Magnetic or non-magnetic; accuracy confirmed by sample and datasheet	Straightness, vial reading and impact resistance
Digital Caliper	Stainless steel beam; actual grade to be confirmed	Range 0 – 150 / 200 / 300 mm	Resolution and accuracy confirmed separately	Zero setting, repeatability, reading and battery

ملاحظات الاختيار: تُسعَّر القطع المفردة والأطقم كلٌّ على حدة؛ وتُتحقَّق الدقة وسعة التحمل بالعينة.
التعبئة: كيس بلاستيك أو بطاقة تعليق أو علبة أدوات للقطعة؛ ومحتويات الطقم تُتفق لاحقًا.

03

الأدوات الكهربائية وأدوات الموقع

مثاقب ومطارق كهربائية وجلايات ومناشير ومجالي ومكنة لحام وغسالة ضغط.

افتح القسم

الأدوات الكهربائية وأدوات الموقع
الصنف	البنية / القدرة	نطاق المقاسات	التوافق / التجهيز	نقاط الفحص
Electric Drill	Corded motor; chuck and gear construction to be confirmed	Rated power typically 500 – 850 W	Chuck approx. 10 / 13 mm; speed setting verified by sample	Run-out, temperature rise, switch and drilling test
Cordless Drill Driver	Lithium-ion platform; rated voltage and battery to be confirmed	12 V / 18 V platform commonly requested	Battery capacity, charger and torque settings to be agreed	Chuck, torque, temperature rise and charge/discharge data
Rotary Hammer	Electro-pneumatic hammer; corded or battery version on request	Power, impact energy and drilling range per model	SDS-plus or other shank must match the drill bits	Impact, mode change, temperature rise and accessories
Angle Grinder	Motor with gear drive; guard to be confirmed	Disc diameter 100 / 115 / 125 mm	Spindle thread and no-load speed matched to the disc rating	Guard, run-out, temperature rise and switch
Circular Saw	Corded or lithium-ion; base plate construction to be confirmed	Blade diameter 165 / 185 / 190 mm	Max cutting depth, bore and guide accessories to be agreed	Guard, base plate, cutting and brake configuration
Jigsaw	Reciprocating mechanism; power platform on request	500 – 800 W corded class commonly requested	Stroke, blade clamp and shank type must match	Blade fixing, base plate and curve cutting
Random Orbital Sander	Orbital drive; dust collection verified by sample	Pad diameter 125 / 150 mm	Orbit size, speed control and paper hole pattern to be agreed	Vibration, dust collection, pad and temperature rise
Heat Gun	Heating element with fan; temperature control to be confirmed	Rated power typically 1600 – 2000 W	Temperature range, airflow and nozzles per model	Temperature control, insulation, temperature rise and stability
Electric Planer	Powered planing head; cutter type to be confirmed	Planing width approx. 82 mm; other sizes on request	Depth of cut, chip discharge and guide fence to be agreed	Base plate, cutter shaft, cutting and guarding
Metal Cut-off Saw	Bench-type abrasive cut-off machine; motor to be confirmed	Abrasive wheel approx. 355 mm	Vice, mitre angle and workpiece range per model	Guard, clamping, squareness and cut quality
Inverter Welder	Inverter MMA set; process to be agreed	Output current range and duty cycle per model	Input supply, electrode and cable set confirmed together	Output, temperature rise, protection and datasheet
Pressure Washer	Motor with high-pressure pump; pump material to be confirmed	Rated pressure and flow per specific model	Water supply, hose, gun and couplings to be agreed	Rated versus peak pressure, leaks and running test

ملاحظات الاختيار: يُتفق على الجهد والتردد والقابس والملحقات لكل طراز؛ وتُراجع بيانات كل طراز بندًا بندًا.
التعبئة: علبة للوحدة أو حقيبة أدوات؛ البطارية والملحقات تُضمَّن فقط إذا حُدِّدت.

04

الثقب والمواد الكاشطة

ريش ثقب وأزاميل وأقراص ماسية ورِاتنجية وأقراص رفرف ومناشير ثقب.

افتح القسم

الثقب والمواد الكاشطة
الصنف	المادة / البنية	نطاق المقاسات	الساق / الخدمة	نقاط الفحص
Twist Drill Bit Set	HSS or equivalent; composition and coating to be confirmed	Diameter 1 – 13 mm; set composition to be agreed	Metal or timber duty confirmed against the tool specification	Diameter, cutting edge, concentricity and drilling trial
Masonry Drill Bit Set	Steel body with carbide tip; construction to be confirmed	Diameter 4 / 6 / 8 / 10 / 12 mm	For masonry and brick; shank matched to the drill	Brazing, cutting edge, shank and drilling performance
SDS Drill Bit	Steel body with carbide tip; number of cutting edges optional	Diameter 6 – 25 mm; working length to be agreed	SDS-plus class; verified against the machine and substrate	Shank, tip, concentricity and impact drilling trial
Pointed Chisel	Heat-treated steel; hardness and toughness to be confirmed	Overall length approx. 250 / 400 mm	Pointed chisel; SDS shank must match the hammer	Shank, point, cracks and chiselling trial
Diamond Saw Blade	Steel core with diamond segments; process to be confirmed	Outer diameter 105 / 115 / 125 / 230 mm	Tile or stone duty; wet or dry cutting to be confirmed	Bore, speed rating, segment bond and cutting trial
Abrasive Cutting Disc	Resin bond with abrasive grain; formulation to be confirmed	Diameter 100 / 115 / 125 / 355 mm	Dedicated versions for carbon steel and stainless steel, selected separately	Rated speed, dimensions, shelf life and cutting trial
Grinding Disc	Resin abrasive system; reinforcement to be confirmed	Diameter 100 / 115 / 125 / 180 mm	Grinding duty; thickness and centre hole to be agreed	Speed rating, cracks, balance and grinding trial
Flap Disc	Coated abrasive flaps on a backing plate; grain optional	Outer diameter 100 / 115 / 125 mm	Grit 40 / 60 / 80 / 120 class	Backing, bonding, speed rating and grinding performance
Sandpaper Sheet	Paper or cloth backing; abrasive system optional	Approx. 230 × 280 mm; size to be agreed	Grit 80 – 1000 class; wet and dry versions kept separate	Grit, grain shedding, backing and sanding result
Wire Cup Brush	Steel or stainless wire; wire grade to be confirmed	Brush diameter 65 / 75 / 100 mm	Thread and speed rating matched to the angle grinder	Wire fixing, balance and wire shedding
Hole Saw Kit	Bi-metal or carbide options on request	Cutting diameter approx. 19 – 76 mm; set composition to be agreed	Substrate, pilot drill and arbor must be matched	Tooth form, brazing, run-out and cutting trial
Screwdriver Bit Set	Tool steel or equivalent; grade to be confirmed	PH / PZ / SL / hex combinations	Approx. 1/4 inch hex shank; impact suitability to be confirmed	Tip fit, hardness, wear and magnetism

ملاحظات الاختيار: تُطابق مع المادة الأساس وسرعة الماكينة ومقاس التركيب؛ وظروف التشغيل تُؤكَّد منفصلة.
التعبئة: علبة بلاستيك أو بطاقة تعليق أو كرتون؛ عدد القطع والحماية من الرطوبة يُتفق عليهما.

05

معدات الأبواب والخزائن

مفصلات ومجاري أدراج وأقفال وأسطوانات وغالقات ومقابض.

افتح القسم

معدات الأبواب والخزائن
الصنف	المادة / البنية	نطاق المقاسات	التركيب / التوافق	نقاط الفحص
Butt Hinge	Stainless or carbon steel; grade and thickness to be confirmed	Length approx. 3 / 4 / 5 inch	Door weight, hole pitch, bearing and handing to be agreed	Dimensions, swing, load bearing and surface
Concealed Cabinet Hinge	Steel body; cup and plating to be confirmed	Cup diameter approx. 35 mm	Full overlay, half overlay or inset; soft-close optional	Hole pitch, adjustment, cycle life and damping
Drawer Slide	Steel ball-bearing or other construction on request	Length 250 – 600 mm class	Rail width, load rating, extension type and soft-close to be agreed	Fitting clearance, smoothness, load and cycle life
Door Lever Lock Set	Stainless steel or zinc alloy; material to be confirmed	Door thickness approx. 35 – 55 mm depending on the model	Lever, lock body and cylinder to be itemised as a full set	Handing, hole pitch, action and durability
Euro Profile Cylinder	Brass or other body; plug to be confirmed	Overall length and asymmetrical split confirmed against door thickness	Key or thumbturn combination; cam size to be agreed	Dimensions, keying hierarchy and durability
Mortise Lock Body	Steel or alloy construction; bolt material to be confirmed	Faceplate, centre distance and backset to be agreed	Cylinder type, lever hole pitch and handing must be matched	Bolt action, hole positions and cycle test
Door Closer	Aluminium housing; hydraulic construction to be confirmed	Selected by door weight, leaf width and opening conditions	Mounting type, closing speed and force to be agreed	Oil leakage, speed adjustment, closing and drilling template
Door Stop	Stainless steel or zinc alloy; buffer to be confirmed	Height, base diameter and fixing holes to be agreed	Floor or wall mounted, fixing method to suit the site	Buffering, fixing, impact and surface
Padlock	Brass or steel body; shackle material to be confirmed	Body width approx. 30 / 40 / 50 / 60 mm	Short or long shackle; keying plan to be agreed	Shackle, operation, corrosion resistance and key matching
Window Handle	Aluminium or zinc alloy options on request	Hole pitch, spindle length and square to be agreed	Matched to casement or tilt-and-turn profile systems	Dimensions, rotation, locking and coating
Window Friction Stay	Stainless steel; actual grade and thickness to be confirmed	Length approx. 8 – 24 inch class	Load, groove width, handing and profile must be matched	Hole positions, friction, load and durability
Door Pull Handle	Stainless steel or aluminium; finish optional	Hole centres 200 / 300 / 400 mm	Door thickness, single or double sided and fixings to be agreed	Dimensions, fixing, grip and corrosion resistance

ملاحظات الاختيار: يجب تأكيد مقاسات التركيب واتجاه الفتح ومستوى الاستخدام وفق المشروع.
التعبئة: كيس أو علبة صغيرة للقطعة؛ عدد البراغي والمفاتيح يُتفق عليه.

06

الأنابيب والوصلات

أنابيب UPVC وPP-R وHDPE وفولاذ مجلفن مع أكواع وتفرعات ومحولات ووصلات.

افتح القسم

الأنابيب والوصلات
الصنف	المادة / النظام	نطاق المقاسات	الوصلة / التوافق	نقاط الفحص
UPVC Pipe	UPVC; formulation and duty class to be confirmed	OD 20 – 110 mm class; length to be agreed	Pressure and drainage duty are selected separately — not interchangeable by default	OD, wall thickness, joint and duty documentation
PPR Pipe	PP-R system; compound and layer structure to be confirmed	OD 20 / 25 / 32 / 40 / 50 / 63 mm	Wall series, temperature/pressure duty and matching fusion fittings to be agreed	OD, wall thickness, fusion and temperature/pressure documents
HDPE Coil Pipe	HDPE; resin grade and compound to be confirmed	OD 20 – 63 mm class; coil length to be agreed	Water supply or irrigation duty; wall thickness and couplings matched	Wall thickness, coil length, joint and duty data
Galvanized Steel Pipe	Steel substrate; galvanising method and grade to be confirmed	DN15 – DN100 class; wall thickness to be agreed	Threaded or other joint; thread form and duty to be confirmed	OD, wall thickness, zinc coating, thread and straightness
Braided Water Connector	Braided outer layer over an inner tube; each layer confirmed	Length 300 / 400 / 500 / 600 mm class	End connections and sealing method to be agreed	Inner tube, crimping, pressure resistance, leakage and compatibility
PVC Elbow	PVC system; pressure and drainage versions kept separate	90°, OD 20 – 110 mm class	Solvent socket or glued joint, matched to the pipe system	Angle, socket depth, wall thickness and joint test
PVC Tee	PVC system; compound and duty to be confirmed	Equal or reducing, OD 20 – 110 mm class	Run and branch sizes and socket method to be agreed	Sockets, dimensions, wall thickness and sealing
PPR Socket Coupling	PP-R system; compound to be confirmed	OD 20 / 25 / 32 / 40 / 50 / 63 mm	Fusion socket; pipe and wall series must match	Socket dimensions, fusion and supporting documents
PPR Female Adapter	PP-R body with a metal insert; materials to be confirmed	20 × 1/2, 25 × 3/4 and similar combinations commonly requested	Plastic OD and thread size are confirmed separately	Insert, thread form, fusion and pressure-tight sealing
PE Compression Elbow	Plastic compression body; O-ring material to be confirmed	OD 20 / 25 / 32 / 40 / 50 / 63 mm	90° elbow, matched to pipe wall and duty	Locking, O-ring, dimensions and joint test
Rubber-lined Pipe Clamp	Steel clamp with rubber lining; coating to be confirmed	Selected by pipe OD and mounting rod	Fixing points, rubber grade and temperature conditions to be agreed	Dimensions, tightening, lining and load bearing
PVC Union	PVC body with O-ring; system to be confirmed	OD 20 – 63 mm class	Socket or threaded ends; ring and end connection must match	Union nut, socket, gasket and sealing

ملاحظات الاختيار: يُؤكَّد القطر الخارجي وDN كلٌّ على حدة؛ ويجب توافق سماكة الجدار والحرارة/الضغط ونظام الوصلات.
التعبئة: الأطوال المستقيمة محزومة، واللفات مغلّفة، والوصلات في أكياس أو علب؛ الطول وعدد الكراتين يُتفق عليهما.

07

الصمامات وتوصيلات السوائل

صمامات كروية وبوابة وعالمية وعدم رجوع وفراشية ومصافي وعدادات وأطواق توصيل.

افتح القسم

الصمامات وتوصيلات السوائل
الصنف	المادة / البنية	نطاق المقاسات	الوصلة / الخدمة	نقاط الفحص
Brass Ball Valve	Brass body; ball and seat material to be confirmed	DN15 – DN50 class; full or reduced bore to be agreed	Female or male thread, matched to the pipeline	Operation, sealing, thread and pressure/temperature data
Gate Valve	Brass or cast iron body, chosen by duty	DN15 – DN100 class; other sizes on request	Threaded or flanged; installation space per project	Seat, stem, sealing and operation
Globe Valve	Cast iron or steel construction; material to be confirmed	DN15 – DN100 class	Connection, flow direction and throttling duty to be agreed	Seat, travel, sealing and pressure test
Check Valve	Brass, stainless or cast iron on request	DN15 – DN100 class	Swing or lift type; installation orientation to be confirmed	Cracking pressure, backflow sealing and medium compatibility
Butterfly Valve	Body, disc and seat materials confirmed separately	DN50 – DN200 class	Wafer or flanged; actuation and mating flanges to be agreed	Operation, sealing, dimensions and pressure test
Y Strainer	Brass, cast iron or stainless on request	DN15 – DN100 class	Screen material, mesh and cleaning conditions to be agreed	Screen, flow direction, sealing and cleaning
Pressure Reducing Valve	Brass or other body; construction to be confirmed	DN15 – DN50 class	Inlet pressure, outlet setting and flow to be agreed	Regulation, stability, leakage and duty documents
Automatic Air Vent	Brass or other material; float construction to be confirmed	Connection approx. 1/2 / 3/4 inch class	Installation position, medium and temperature to be agreed	Air release, shut-off, sealing and connection
Angle Stop Valve	Brass or other body; surface finish to be confirmed	Connection approx. 1/2 / 3/8 inch class	Hot or cold duty; thread and outlet must be matched	Operation, thread, sealing and plating
Mechanical Water Meter	Metal body; measuring mechanism and wetted parts to be confirmed	DN15 / DN20 / DN25 class	Hot or cold water, installation orientation and flow class to be agreed	Reading, sealing, calibration and application documents
Pipe Flange	Carbon or stainless steel; grade and manufacturing method to be confirmed	DN15 – DN200 class	Pressure class, bolt pitch, face type and pipe matching	Dimensions, face, material and connection system
PTFE Thread Seal Tape	PTFE tape; density and compound to be confirmed	Width 12 / 19 / 25 mm; roll length to be agreed	Thread sealing; medium and service conditions to be confirmed	Width, thickness, length, tensile and seal test

ملاحظات الاختيار: تُؤكَّد درجة الضغط والوسط والحرارة ومادة الإحكام بندًا بندًا.
التعبئة: علبة أو صندوق خشبي للقطعة؛ حماية الفتحات وسجلات الاختبار يُتفق عليهما.

08

الأدوات الصحية والسباكة

خلاطات وأطقم دش وأحواض ومراحيض ومصارف أرضية وتصريفات ومصائد ماء.

افتح القسم

الأدوات الصحية والسباكة
الصنف	المادة / البنية	نطاق المقاسات	الوصلة / التركيب	نقاط الفحص
Kitchen Faucet	Brass or stainless body; cartridge to be confirmed	Single or dual lever; high-arc spout optional	Tap hole, hoses, inlet connection and thread to be agreed	Flow, cartridge, sealing, plating and wetted-material data
Basin Mixer	Body and wetted materials confirmed item by item	Single hole or other mounting on request	Basin hole, spout height and waste set to be agreed	Cartridge, flow rate, sealing and surface
Shower Set	Head, hand shower, rail and valve materials to be confirmed	Head size, rail length and spray mode to be agreed	Exposed or concealed; centre distance and connections confirmed	Set completeness, diverter, sealing and plating
Shower Hose	Metal or plastic outer layer; inner tube to be confirmed	Length 1.2 / 1.5 / 1.8 m class	End nuts, seals and anti-twist construction to be agreed	Crimping, tensile, pressure resistance and leakage
Stainless Steel Sink	Stainless steel; grade, sheet thickness and process to be confirmed	Single or double bowl; overall size chosen to suit the worktop	Top-mount or undermount; cut-out and waste kit to be agreed	Sheet thickness, flatness, drainage, sound pad and wetted-material data
Ceramic Wash Basin	Ceramic body and glaze; documentation to be confirmed	Width approx. 400 – 600 mm class	Countertop or wall-hung; tap holes and support to be agreed	Glaze, dimensions, drainage and tap holes
Ceramic Toilet	Ceramic body; cistern and seat configuration to be agreed	Drain direction, rough-in and overall size per site	Wall or floor outlet; inlet and flush system matched	Flush, sealing, dimensions, fittings and application documents
Floor Drain	Stainless steel grate; core material to be confirmed	Grate approx. 100 × 100 / 150 × 150 mm	Pipe size, outlet height and odour trap to be agreed	Drainage, removability, sealing and load conditions
Pop-up Basin Waste	Brass or stainless body; plating to be confirmed	Connection approx. 1-1/4 / 1-1/2 inch class	With or without overflow, matched to the basin	Pop-up action, sealing, thread and fit
Basin P Trap	Metal or plastic, chosen by duty	Pipe size and connection approx. 32 / 40 mm class	Wall outlet position, water seal and service access to be confirmed	Dimensions, sealing, drainage and disassembly
Towel Rail	Stainless, aluminium or zinc alloy on request	Length 400 / 500 / 600 mm class	Hole pitch, wall fixing and single or double bar to be agreed	Fixing, load, surface and edges
Toilet Paper Holder	Stainless or alloy body; finish optional	Roll width and overall size to your requirement	With or without cover; hole pitch and mounting surface to be agreed	Rotation, fixing, burrs and surface

ملاحظات الاختيار: تُؤكَّد المقاسات الفعلية والمواد الملامسة للماء وظروف الساخن/البارد بالعينة ووفق المشروع.
التعبئة: علبة داخلية واقية وكرتون لكل قطعة؛ التحميل على منصات وتغطية الكسر للقطع الكبيرة يُتفق عليهما.

09

التمديدات الكهربائية

كابلات ومواسير ومجاري وعلب ومفاتيح ومآخذ وقواطع ولوحات توزيع.

افتح القسم

التمديدات الكهربائية
الصنف	المادة / البنية	نطاق المقاسات	النظام / الوصلة	نقاط الفحص
Single-core Copper Wire	Copper conductor with insulation; material and construction to be confirmed	Cross-section 1.5 / 2.5 / 4 / 6 mm² class	Rated voltage, colour, solid or stranded and duty to be agreed	Conductor size, resistance, insulation and length
Multicore Cable	Copper or other conductor; insulation and sheath to be confirmed	Core count and individual core size per the circuit design	Voltage, installation environment and flame-retardant requirements to be agreed	Core count, size, sheath and matching test documents
PVC Electrical Conduit	PVC system; mechanical properties and duty to be confirmed	OD 16 / 20 / 25 / 32 mm class	Surface or concealed, flame-retardant grade and similar conditions per project	OD, wall thickness, bending, compression and documents
PVC Cable Trunking	PVC body with lid; material to be confirmed	Approx. 25 × 16 / 40 × 25 / 60 × 40 mm class	Capacity, lid engagement and fixing method to be agreed	Dimensions, lid fit, wall thickness and duty documents
Electrical Junction Box	Plastic or metal; actual construction per project	Single or multi-gang; outline and depth to be agreed	Plate system, cable entries and mounting must be matched	Dimensions, screw pillars, flame-retardant or earthing documents
Wall Switch	Plate and contact materials confirmed per model	Single, double or multi-gang; rating to be agreed	One-way or two-way wiring confirmed separately	Contacts, temperature rise, life and market suitability
Wall Socket Outlet	Plate, current-carrying parts and shutter to be confirmed	Selected against the destination plug system	Rated voltage, current, earthing and wiring conditions to be confirmed	Dimensions, insertion, temperature rise and model documents
Miniature Circuit Breaker	Thermal-magnetic or similar trip; exact type to be confirmed	Poles, rated current and trip curve to be agreed	Rated voltage, breaking capacity and system coordination confirmed	Tripping, temperature rise, marking and model test documents
Residual Current Breaker	Residual-current construction; type chosen by system	Poles, rated current and residual operating current to be agreed	RCCB and RCBO kept separate; protective functions confirmed individually	Operation, wiring, test button and model documents
Distribution Board	Plastic or metal enclosure; construction to be confirmed	Way count, dimensions and mounting to be agreed	DIN rail, terminals, IP rating and modules quoted separately	Enclosure, terminals, door and complete assembly
Nylon Cable Tie	Nylon or other polymer; compound and colour to be confirmed	Width 2.5 – 7.6 mm, length 100 – 500 mm	Indoor or weather-resistant duty; tensile class to be agreed	Width and length, pawl, tensile and ageing data
Lever Wire Connector	Insulating housing with current-carrying parts; materials to be confirmed	2 / 3 / 5 port class; wire range to be confirmed	Solid or stranded suitability and ratings confirmed per model	Clamping, temperature rise, contact and model documents

ملاحظات الاختيار: تُتحقَّق القيم المقننة والاستخدام ومستندات سوق الوصول وفق الطراز الفعلي.
التعبئة: الكابل ملفوف أو على بكرة، والأجهزة في علب منفردة؛ الوسم وتكوين الكرتون يُتفق عليهما.

10

الإضاءة والتهوية

لمبات LED ولوحات وكشافات وإضاءة صناعية وشمسية وطوارئ ومراوح.

افتح القسم

الإضاءة والتهوية
الصنف	البنية / مصدر الضوء	نطاق المقاسات	التركيب / التغذية	نقاط الفحص
LED Bulb	LED source with heat-sinking body; cap type optional	Power 5 / 9 / 12 / 15 W commonly requested	Cap, voltage, colour temperature and outline must be matched	Luminous flux, power, temperature rise and model documents
LED Tube	Linear LED source; housing and lampholder to be confirmed	Length 600 / 1200 / 1500 mm class	Single or double-ended supply; retrofit method must be confirmed	Wiring, optics, temperature rise and installation documents
LED Panel Light	LED with light-guide or diffuser; driver to be confirmed	Approx. 300 × 300 / 600 × 600 mm class	Recessed, suspended or surface; colour temperature and driver to be agreed	Dimensions, glare, luminous flux and driver data
LED Downlight	LED source with housing; reflector optional	Power, cut-out and face diameter chosen to suit the space	Recessed mounting; colour temperature, dimming and driver to be confirmed	Cut-out, heat dissipation, optics and electrical data
LED Floodlight	Metal housing with LED module; lens optional	Power 30 / 50 / 100 W commonly requested	Outdoor ingress protection, bracket, colour temperature and driver to be agreed	Ingress protection, heat dissipation, luminous flux and ratings
LED High Bay Light	LED module with metal heat sink; driver to be confirmed	Power 100 / 150 / 200 W commonly requested	Mounting height, light distribution, installation and driver matched	Light distribution, temperature rise, luminous flux and mounting structure
Low-voltage LED Strip	Flexible circuit board with LEDs; encapsulation optional	12 V / 24 V versions; power per metre to be agreed	Colour temperature, density, cut points, driver and connectors matched	Voltage drop, colour consistency, adhesion and heat
Solar Street Light	Luminaire with PV panel and battery; construction to be confirmed	Configuration selected against illuminance, road class and climate	Panel, battery capacity, controller and pole to be confirmed	Energy sizing, lighting test and battery data
Emergency Light	LED source with rechargeable battery; control to be confirmed	Single or twin head; emergency duration per project	Self-contained or central battery supply confirmed separately	Changeover, duration, illuminance and model documents
Exit Sign Luminaire	Housing with legend panel; supply arrangement to be confirmed	Size, viewing distance and mounting orientation to be agreed	Pictogram, arrow direction and language confirmed per project	Emergency function, luminance and destination-market documents
Bathroom Exhaust Fan	Motor with impeller; housing and backdraft shutter to be confirmed	Grille or cut-out approx. 100 – 200 mm class	Airflow, noise, duct connection and power supply to be agreed	Airflow, temperature rise, ingress protection and installation
Ceiling Fan	Motor, blades and suspension; materials to be confirmed	Sweep 36 / 48 / 56 inch class	Ceiling height, speed control, remote and power supply to be agreed	Airflow, balance, temperature rise and suspension structure

ملاحظات الاختيار: تُؤكَّد الخصائص الكهربائية والبصرية والحماية من الغبار والظروف المحيطة وفق الطراز الفعلي واختباراته.
التعبئة: علبة داخلية وكرتون لكل قطعة؛ المحوّل وملحقات التركيب تُضمَّن فقط إذا حُدِّدت.

11

العزل المائي والحراري

أسمنت ومونة ولاصق بلاط ومواد عزل وألواح عزل.

افتح القسم

العزل المائي والحراري
الصنف	المادة / التركيبة	نطاق المقاسات	الاستخدام / التطبيق	نقاط الفحص
Bagged Cement	Cement type and class chosen by project — no formulation assumed	25 / 40 / 50 kg bags commonly requested	Confirmed against the design, the environment and local procurement requirements	Type, class, batch, net weight and test documents
Dry-mix Masonry Mortar	Binder and aggregate blend; actual formulation to be confirmed	25 / 40 kg bags commonly requested	Strength class, substrate, water ratio and site conditions to be agreed	Strength, workability, batch, shelf life and formulation data
Tile Adhesive	Cement-based or other system, chosen by application	20 / 25 kg bags commonly requested	Interior, exterior, wall or floor; tile size and class confirmed separately	Adhesion, slip, open time and application data
Silicone Sealant	Silicone system; acetic and neutral cure kept separate	Approx. 280 / 300 mL cartridge class	Substrate, movement, weather and mould-resistant duty to be confirmed	Compatibility, adhesion, curing and performance documents
PU Foam Sealant	Polyurethane foam system; actual formulation to be confirmed	500 / 750 mL cans commonly requested	Gun or straw type; application temperature, humidity and gap conditions to be confirmed	Yield, expansion, curing and transport/storage data
Waterproof Coating	Polymer-cement or acrylic system on request	5 / 10 / 20 kg packs commonly requested	Substrate, interior or exterior use, coat thickness and build-up to be confirmed	Adhesion, water resistance, batch and application performance documents
Bituminous Membrane	Modified bitumen system; carrier and surfacing to be confirmed	Width approx. 1 m; thickness 3 / 4 mm class	Application method, lap and climate suitability to be agreed	Thickness, area, carrier and performance data
Rock Wool Insulation Board	Mineral fibre system; density and binder to be confirmed	Thickness 30 / 50 / 80 / 100 mm class	External wall, roof or equipment duty; build-up system to be agreed	Density, dimensions, thermal and reaction-to-fire data
XPS Insulation Board	Extruded polystyrene; formulation and density to be confirmed	Thickness 20 / 30 / 50 / 100 mm class	Compressive, thermal and reaction-to-fire performance verified separately per project	Density, thickness, compression and performance documents
Fiberglass Mesh	Glass fibre with coating; alkali resistance to be confirmed	Width approx. 1 m; weight 80 – 160 g/m² class	Mesh size, lap, system and application to be agreed	Weight, mesh, tensile and alkali-resistance documents
Perforated Corner Bead	Galvanised steel, PVC or aluminium on request	Length 2 / 2.5 / 3 m class	Wing width and thickness matched to the plaster or board system	Straightness, dimensions, perforation and fixing
Tile Leveling System	Plastic base with wedge or other system on request	Joint 1 / 1.5 / 2 / 3 mm class	Tile thickness, wedge and pliers must be matched	Dimensions, break point, clamping and laying result

ملاحظات الاختيار: يجب تأكيد الاستخدام وفئة الأداء ونظام الطبقات وفق البيانات الفعلية ولوح عينة.
التعبئة: في أكياس أو براميل أو لفات؛ المحتوى الصافي ومدة الصلاحية والنقل يُتفق عليها.

12

مواد البناء والتشطيب

حديد تسليح ومقاطع مجوفة وألواح تسقيف وبلاط وأرضيات وألواح وزجاج ودهانات.

افتح القسم

مواد البناء والتشطيب
الصنف	المادة / البنية	نطاق المقاسات	المشروع / التجهيز	نقاط الفحص
Deformed Steel Rebar	Steel grade, strength class and manufacturing route to be confirmed	Nominal diameter 8 / 10 / 12 / 16 / 20 mm class	Length, bending, welding and design requirements to be agreed	Grade, diameter, weight deviation and mechanical data
Galvanized Hollow Section	Steel hollow section; grade and galvanising method to be confirmed	Square 20 × 20 up to 100 × 100 mm class	Wall thickness, length, section and duty confirmed per project	Section, wall thickness, straightness, coating and material
Steel Angle	Steel grade and manufacturing route to be confirmed	Leg 25 – 75 mm class; thickness to be agreed	Equal or unequal leg; length and connection to be agreed	Section, straightness, weight and material data
Profiled Roofing Sheet	Coated steel substrate; metallic coating and paint film to be confirmed	Base steel approx. 0.3 – 0.6 mm class	Profile, effective width, sheet length, pitch and accessories to be agreed	Base thickness, coating, paint, lap and duty documents
Ceramic Floor Tile	Ceramic body and glaze; tile class to be confirmed	300 × 300 / 600 × 600 / 800 × 800 mm	Interior or exterior, slip resistance, water absorption and laying system to be agreed	Dimensions, flatness, shade, slip resistance and performance data
SPC Click Flooring	Composite plank; core and wear layer to be confirmed	Overall thickness approx. 4 / 5 / 6 mm class	Wear layer, click profile, underlay and subfloor conditions to be agreed	Dimensions, click joint, wear resistance and test documents
Gypsum Plasterboard	Gypsum core with paper facing; actual formulation to be confirmed	Approx. 1200 × 2400 mm, thickness 9.5 / 12 mm class	Standard or moisture-resistant kept separate; framing and fixings matched	Thickness, edge type, strength and model documents
Fiber Cement Board	Cementitious matrix with fibre; composition documents to be confirmed	Approx. 1220 × 2440 mm, thickness 6 / 8 / 10 mm class	Interior or exterior use, substrate, fixing and cutting method to be agreed	Dimensions, strength, water absorption and composition data
Aluminum Composite Panel	Aluminium skins over a core; core and coating to be confirmed	Overall thickness 3 / 4 mm class; skin thickness to be agreed	Interior or exterior use, reaction-to-fire and fixing system verified separately	Overall thickness, skin, peel strength, coating and performance documents
Architectural Glass	Glass type and processing to be confirmed	Thickness 4 / 5 / 6 / 8 / 10 mm class	Annealed, toughened, laminated or insulating glass selected separately by duty	Dimensions, edge work, processing and performance documents
Interior Wall Paint	Water-based or other system; composition and primer to be confirmed	5 / 15 / 18 L packs commonly requested	Colour reference, substrate, opacity and application conditions to be agreed	Colour consistency, opacity, batch and test documents
Decorative Skirting Board	PVC, WPC, MDF or aluminium on request	Height 60 / 80 / 100 mm class	Length, colour, corner pieces and fixing method to be agreed	Dimensions, straightness, surface, jointing and material

ملاحظات الاختيار: تُتحقَّق خصائص التحمل والطقس والتفاعل مع النار أو البيئة وفق المادة الفعلية والمشروع.
التعبئة: الحديد محزوم، والألواح على منصات، والدهان في براميل؛ حماية النقل يُتفق عليها.

كتالوج المنتجات

أدوات التثبيت

الأدوات اليدوية والقياس

الأدوات الكهربائية وأدوات الموقع

الثقب والمواد الكاشطة

معدات الأبواب والخزائن

الأنابيب والوصلات

الصمامات وتوصيلات السوائل

الأدوات الصحية والسباكة

التمديدات الكهربائية

الإضاءة والتهوية

العزل المائي والحراري

مواد البناء والتشطيب

اطلب عرض سعر لحاوية