الصمامات وتوصيلات السوائل
صمامات كروية وبوابة وعالمية وعدم رجوع وفراشية ومصافي وعدادات وأطواق توصيل.
ما يشمله هذا القسم
المقاسات المعتادة والنقاط التي نتحقق منها قبل عرض السعر. اختر السطر الأقرب لاحتياجك ونؤكد الباقي.
| الصنف | المادة / البنية | نطاق المقاسات | الوصلة / الخدمة | نقاط الفحص |
|---|---|---|---|---|
| Brass Ball Valve | Brass body; ball and seat material to be confirmed | DN15 – DN50 class; full or reduced bore to be agreed | Female or male thread, matched to the pipeline | Operation, sealing, thread and pressure/temperature data |
| Gate Valve | Brass or cast iron body, chosen by duty | DN15 – DN100 class; other sizes on request | Threaded or flanged; installation space per project | Seat, stem, sealing and operation |
| Globe Valve | Cast iron or steel construction; material to be confirmed | DN15 – DN100 class | Connection, flow direction and throttling duty to be agreed | Seat, travel, sealing and pressure test |
| Check Valve | Brass, stainless or cast iron on request | DN15 – DN100 class | Swing or lift type; installation orientation to be confirmed | Cracking pressure, backflow sealing and medium compatibility |
| Butterfly Valve | Body, disc and seat materials confirmed separately | DN50 – DN200 class | Wafer or flanged; actuation and mating flanges to be agreed | Operation, sealing, dimensions and pressure test |
| Y Strainer | Brass, cast iron or stainless on request | DN15 – DN100 class | Screen material, mesh and cleaning conditions to be agreed | Screen, flow direction, sealing and cleaning |
| Pressure Reducing Valve | Brass or other body; construction to be confirmed | DN15 – DN50 class | Inlet pressure, outlet setting and flow to be agreed | Regulation, stability, leakage and duty documents |
| Automatic Air Vent | Brass or other material; float construction to be confirmed | Connection approx. 1/2 / 3/4 inch class | Installation position, medium and temperature to be agreed | Air release, shut-off, sealing and connection |
| Angle Stop Valve | Brass or other body; surface finish to be confirmed | Connection approx. 1/2 / 3/8 inch class | Hot or cold duty; thread and outlet must be matched | Operation, thread, sealing and plating |
| Mechanical Water Meter | Metal body; measuring mechanism and wetted parts to be confirmed | DN15 / DN20 / DN25 class | Hot or cold water, installation orientation and flow class to be agreed | Reading, sealing, calibration and application documents |
| Pipe Flange | Carbon or stainless steel; grade and manufacturing method to be confirmed | DN15 – DN200 class | Pressure class, bolt pitch, face type and pipe matching | Dimensions, face, material and connection system |
| PTFE Thread Seal Tape | PTFE tape; density and compound to be confirmed | Width 12 / 19 / 25 mm; roll length to be agreed | Thread sealing; medium and service conditions to be confirmed | Width, thickness, length, tensile and seal test |
- ملاحظات الاختيار
- تُؤكَّد درجة الضغط والوسط والحرارة ومادة الإحكام بندًا بندًا.
- التعبئة
- علبة أو صندوق خشبي للقطعة؛ حماية الفتحات وسجلات الاختبار يُتفق عليهما.
يُسعَّر هذا القسم صنفًا بصنف، ولا توجد قائمة مخزون ثابتة. أرسل المواصفة ونؤكد المادة والمقاس والتغليف قبل الطلب.
اطلب عرض سعر لحاوية
أخبرنا بميناء الوصول والفئات التي تحتاجها. واتساب هو الأسرع، والدردشة المباشرة في هذه الصفحة تصل إلينا بالطريقة نفسها.
