Robinetterie et raccordement fluidique
Vannes à bille, à opercule, à soupape, clapets, papillons, filtres, compteurs et brides.
Ce que couvre cette famille
Dimensions courantes et points vérifiés avant devis. Choisissez la ligne la plus proche de votre besoin, nous confirmons le reste.
| Article | Matière / structure | Plage de dimensions | Raccordement / usage | Points de contrôle |
|---|---|---|---|---|
| Brass Ball Valve | Brass body; ball and seat material to be confirmed | DN15 – DN50 class; full or reduced bore to be agreed | Female or male thread, matched to the pipeline | Operation, sealing, thread and pressure/temperature data |
| Gate Valve | Brass or cast iron body, chosen by duty | DN15 – DN100 class; other sizes on request | Threaded or flanged; installation space per project | Seat, stem, sealing and operation |
| Globe Valve | Cast iron or steel construction; material to be confirmed | DN15 – DN100 class | Connection, flow direction and throttling duty to be agreed | Seat, travel, sealing and pressure test |
| Check Valve | Brass, stainless or cast iron on request | DN15 – DN100 class | Swing or lift type; installation orientation to be confirmed | Cracking pressure, backflow sealing and medium compatibility |
| Butterfly Valve | Body, disc and seat materials confirmed separately | DN50 – DN200 class | Wafer or flanged; actuation and mating flanges to be agreed | Operation, sealing, dimensions and pressure test |
| Y Strainer | Brass, cast iron or stainless on request | DN15 – DN100 class | Screen material, mesh and cleaning conditions to be agreed | Screen, flow direction, sealing and cleaning |
| Pressure Reducing Valve | Brass or other body; construction to be confirmed | DN15 – DN50 class | Inlet pressure, outlet setting and flow to be agreed | Regulation, stability, leakage and duty documents |
| Automatic Air Vent | Brass or other material; float construction to be confirmed | Connection approx. 1/2 / 3/4 inch class | Installation position, medium and temperature to be agreed | Air release, shut-off, sealing and connection |
| Angle Stop Valve | Brass or other body; surface finish to be confirmed | Connection approx. 1/2 / 3/8 inch class | Hot or cold duty; thread and outlet must be matched | Operation, thread, sealing and plating |
| Mechanical Water Meter | Metal body; measuring mechanism and wetted parts to be confirmed | DN15 / DN20 / DN25 class | Hot or cold water, installation orientation and flow class to be agreed | Reading, sealing, calibration and application documents |
| Pipe Flange | Carbon or stainless steel; grade and manufacturing method to be confirmed | DN15 – DN200 class | Pressure class, bolt pitch, face type and pipe matching | Dimensions, face, material and connection system |
| PTFE Thread Seal Tape | PTFE tape; density and compound to be confirmed | Width 12 / 19 / 25 mm; roll length to be agreed | Thread sealing; medium and service conditions to be confirmed | Width, thickness, length, tensile and seal test |
- Notes de choix
- Classe de pression, fluide, température et matériau d’étanchéité confirmés poste par poste.
- Conditionnement
- Boîte ou caisse par pièce ; protection des orifices et procès-verbaux d’essai à convenir.
Cette famille est chiffrée article par article, sans liste de stock figée. Envoyez la spécification : nous confirmons matière, dimension et emballage avant commande.
Demander un devis conteneur
Indiquez-nous le port de destination et les catégories dont vous avez besoin. WhatsApp est le plus rapide ; le chat de cette page nous joint de la même manière.
