Perçage et abrasifs
Forets, burins, disques diamant et résine, disques à lamelles et scies cloches.
Ce que couvre cette famille
Dimensions courantes et points vérifiés avant devis. Choisissez la ligne la plus proche de votre besoin, nous confirmons le reste.
| Article | Matière / structure | Plage de dimensions | Queue / usage | Points de contrôle |
|---|---|---|---|---|
| Twist Drill Bit Set | HSS or equivalent; composition and coating to be confirmed | Diameter 1 – 13 mm; set composition to be agreed | Metal or timber duty confirmed against the tool specification | Diameter, cutting edge, concentricity and drilling trial |
| Masonry Drill Bit Set | Steel body with carbide tip; construction to be confirmed | Diameter 4 / 6 / 8 / 10 / 12 mm | For masonry and brick; shank matched to the drill | Brazing, cutting edge, shank and drilling performance |
| SDS Drill Bit | Steel body with carbide tip; number of cutting edges optional | Diameter 6 – 25 mm; working length to be agreed | SDS-plus class; verified against the machine and substrate | Shank, tip, concentricity and impact drilling trial |
| Pointed Chisel | Heat-treated steel; hardness and toughness to be confirmed | Overall length approx. 250 / 400 mm | Pointed chisel; SDS shank must match the hammer | Shank, point, cracks and chiselling trial |
| Diamond Saw Blade | Steel core with diamond segments; process to be confirmed | Outer diameter 105 / 115 / 125 / 230 mm | Tile or stone duty; wet or dry cutting to be confirmed | Bore, speed rating, segment bond and cutting trial |
| Abrasive Cutting Disc | Resin bond with abrasive grain; formulation to be confirmed | Diameter 100 / 115 / 125 / 355 mm | Dedicated versions for carbon steel and stainless steel, selected separately | Rated speed, dimensions, shelf life and cutting trial |
| Grinding Disc | Resin abrasive system; reinforcement to be confirmed | Diameter 100 / 115 / 125 / 180 mm | Grinding duty; thickness and centre hole to be agreed | Speed rating, cracks, balance and grinding trial |
| Flap Disc | Coated abrasive flaps on a backing plate; grain optional | Outer diameter 100 / 115 / 125 mm | Grit 40 / 60 / 80 / 120 class | Backing, bonding, speed rating and grinding performance |
| Sandpaper Sheet | Paper or cloth backing; abrasive system optional | Approx. 230 × 280 mm; size to be agreed | Grit 80 – 1000 class; wet and dry versions kept separate | Grit, grain shedding, backing and sanding result |
| Wire Cup Brush | Steel or stainless wire; wire grade to be confirmed | Brush diameter 65 / 75 / 100 mm | Thread and speed rating matched to the angle grinder | Wire fixing, balance and wire shedding |
| Hole Saw Kit | Bi-metal or carbide options on request | Cutting diameter approx. 19 – 76 mm; set composition to be agreed | Substrate, pilot drill and arbor must be matched | Tooth form, brazing, run-out and cutting trial |
| Screwdriver Bit Set | Tool steel or equivalent; grade to be confirmed | PH / PZ / SL / hex combinations | Approx. 1/4 inch hex shank; impact suitability to be confirmed | Tip fit, hardness, wear and magnetism |
- Notes de choix
- Adapté au support, à la vitesse machine et au montage ; conditions d’emploi confirmées à part.
- Conditionnement
- Boîtier plastique, blister ou carton ; nombre de pièces et protection contre l’humidité à convenir.
Cette famille est chiffrée article par article, sans liste de stock figée. Envoyez la spécification : nous confirmons matière, dimension et emballage avant commande.
Demander un devis conteneur
Indiquez-nous le port de destination et les catégories dont vous avez besoin. WhatsApp est le plus rapide ; le chat de cette page nous joint de la même manière.
