Van và kết nối chất lỏng
Van bi, van cổng, van cầu, van một chiều và van bướm, lọc, đồng hồ và mặt bích.
Nhóm này bao gồm những gì
Kích thước thường gặp và những điểm chúng tôi kiểm tra trước khi báo giá. Chọn dòng gần nhất với yêu cầu của bạn, phần còn lại chúng tôi xác nhận.
| Mặt hàng | Material / build | Size range | Connection / duty | Key checks |
|---|---|---|---|---|
| Brass Ball Valve | Brass body; ball and seat material to be confirmed | DN15 – DN50 class; full or reduced bore to be agreed | Female or male thread, matched to the pipeline | Operation, sealing, thread and pressure/temperature data |
| Gate Valve | Brass or cast iron body, chosen by duty | DN15 – DN100 class; other sizes on request | Threaded or flanged; installation space per project | Seat, stem, sealing and operation |
| Globe Valve | Cast iron or steel construction; material to be confirmed | DN15 – DN100 class | Connection, flow direction and throttling duty to be agreed | Seat, travel, sealing and pressure test |
| Check Valve | Brass, stainless or cast iron on request | DN15 – DN100 class | Swing or lift type; installation orientation to be confirmed | Cracking pressure, backflow sealing and medium compatibility |
| Butterfly Valve | Body, disc and seat materials confirmed separately | DN50 – DN200 class | Wafer or flanged; actuation and mating flanges to be agreed | Operation, sealing, dimensions and pressure test |
| Y Strainer | Brass, cast iron or stainless on request | DN15 – DN100 class | Screen material, mesh and cleaning conditions to be agreed | Screen, flow direction, sealing and cleaning |
| Pressure Reducing Valve | Brass or other body; construction to be confirmed | DN15 – DN50 class | Inlet pressure, outlet setting and flow to be agreed | Regulation, stability, leakage and duty documents |
| Automatic Air Vent | Brass or other material; float construction to be confirmed | Connection approx. 1/2 / 3/4 inch class | Installation position, medium and temperature to be agreed | Air release, shut-off, sealing and connection |
| Angle Stop Valve | Brass or other body; surface finish to be confirmed | Connection approx. 1/2 / 3/8 inch class | Hot or cold duty; thread and outlet must be matched | Operation, thread, sealing and plating |
| Mechanical Water Meter | Metal body; measuring mechanism and wetted parts to be confirmed | DN15 / DN20 / DN25 class | Hot or cold water, installation orientation and flow class to be agreed | Reading, sealing, calibration and application documents |
| Pipe Flange | Carbon or stainless steel; grade and manufacturing method to be confirmed | DN15 – DN200 class | Pressure class, bolt pitch, face type and pipe matching | Dimensions, face, material and connection system |
| PTFE Thread Seal Tape | PTFE tape; density and compound to be confirmed | Width 12 / 19 / 25 mm; roll length to be agreed | Thread sealing; medium and service conditions to be confirmed | Width, thickness, length, tensile and seal test |
- Selection notes
- Pressure class, medium, temperature and seal material are confirmed item by item.
- Packing
- Boxed or crated per piece; port protection and test records to be agreed.
Nhóm này báo giá theo từng mặt hàng, không có danh mục tồn kho cố định. Gửi quy cách và chúng tôi xác nhận vật liệu, kích thước, đóng gói trước khi bạn đặt.
Yêu cầu báo giá container
Cho chúng tôi biết cảng đến và danh mục bạn cần. WhatsApp là nhanh nhất; chat trực tiếp trên trang này cũng đến cùng một nơi.
