Ống và phụ kiện ống
Ống uPVC, PP-R, HDPE và ống tráng kẽm cùng cút, tê, đầu nối và khớp nối.
Nhóm này bao gồm những gì
Kích thước thường gặp và những điểm chúng tôi kiểm tra trước khi báo giá. Chọn dòng gần nhất với yêu cầu của bạn, phần còn lại chúng tôi xác nhận.
| Mặt hàng | Material / system | Size range | Joint / fit | Key checks |
|---|---|---|---|---|
| UPVC Pipe | UPVC; formulation and duty class to be confirmed | OD 20 – 110 mm class; length to be agreed | Pressure and drainage duty are selected separately — not interchangeable by default | OD, wall thickness, joint and duty documentation |
| PPR Pipe | PP-R system; compound and layer structure to be confirmed | OD 20 / 25 / 32 / 40 / 50 / 63 mm | Wall series, temperature/pressure duty and matching fusion fittings to be agreed | OD, wall thickness, fusion and temperature/pressure documents |
| HDPE Coil Pipe | HDPE; resin grade and compound to be confirmed | OD 20 – 63 mm class; coil length to be agreed | Water supply or irrigation duty; wall thickness and couplings matched | Wall thickness, coil length, joint and duty data |
| Galvanized Steel Pipe | Steel substrate; galvanising method and grade to be confirmed | DN15 – DN100 class; wall thickness to be agreed | Threaded or other joint; thread form and duty to be confirmed | OD, wall thickness, zinc coating, thread and straightness |
| Braided Water Connector | Braided outer layer over an inner tube; each layer confirmed | Length 300 / 400 / 500 / 600 mm class | End connections and sealing method to be agreed | Inner tube, crimping, pressure resistance, leakage and compatibility |
| PVC Elbow | PVC system; pressure and drainage versions kept separate | 90°, OD 20 – 110 mm class | Solvent socket or glued joint, matched to the pipe system | Angle, socket depth, wall thickness and joint test |
| PVC Tee | PVC system; compound and duty to be confirmed | Equal or reducing, OD 20 – 110 mm class | Run and branch sizes and socket method to be agreed | Sockets, dimensions, wall thickness and sealing |
| PPR Socket Coupling | PP-R system; compound to be confirmed | OD 20 / 25 / 32 / 40 / 50 / 63 mm | Fusion socket; pipe and wall series must match | Socket dimensions, fusion and supporting documents |
| PPR Female Adapter | PP-R body with a metal insert; materials to be confirmed | 20 × 1/2, 25 × 3/4 and similar combinations commonly requested | Plastic OD and thread size are confirmed separately | Insert, thread form, fusion and pressure-tight sealing |
| PE Compression Elbow | Plastic compression body; O-ring material to be confirmed | OD 20 / 25 / 32 / 40 / 50 / 63 mm | 90° elbow, matched to pipe wall and duty | Locking, O-ring, dimensions and joint test |
| Rubber-lined Pipe Clamp | Steel clamp with rubber lining; coating to be confirmed | Selected by pipe OD and mounting rod | Fixing points, rubber grade and temperature conditions to be agreed | Dimensions, tightening, lining and load bearing |
| PVC Union | PVC body with O-ring; system to be confirmed | OD 20 – 63 mm class | Socket or threaded ends; ring and end connection must match | Union nut, socket, gasket and sealing |
- Selection notes
- OD and DN are confirmed separately; wall thickness, temperature/pressure and fitting system must match.
- Packing
- Straight lengths bundled, coils wrapped, fittings bagged or boxed; length and carton count to be agreed.
Nhóm này báo giá theo từng mặt hàng, không có danh mục tồn kho cố định. Gửi quy cách và chúng tôi xác nhận vật liệu, kích thước, đóng gói trước khi bạn đặt.
Yêu cầu báo giá container
Cho chúng tôi biết cảng đến và danh mục bạn cần. WhatsApp là nhanh nhất; chat trực tiếp trên trang này cũng đến cùng một nơi.
