Baut dan Mur
Baut, mur, ring, dan angkur dalam standar metrik dan imperial.
Cakupan kelompok ini
Ukuran umum dan hal yang kami periksa sebelum menawarkan. Pilih baris yang paling dekat dengan kebutuhan Anda, sisanya kami konfirmasi.
| Item | Material / mutu | Rentang ukuran | Ulir / finishing | Pemeriksaan kunci |
|---|---|---|---|---|
| Hex Bolt | Carbon or stainless steel; grade to be confirmed | M6 – M24; length chosen to suit the joint thickness | Metric thread; zinc plated or plain on request | Dimensions, tolerance, go/no-go thread gauge, material grade |
| Hex Nut | Carbon or stainless steel, grade matched to the bolt | M6 – M24; other sizes on request | Metric thread form; coating confirmed per project | Across-flats, thickness, thread and bolt compatibility |
| Flat Washer | Carbon or stainless steel, hardness to your requirement | Suits M4 – M24; ID, OD and thickness to be confirmed | Standard or oversized (fender) OD; finish optional | Dimensions, flatness, burrs and hardness |
| Spring Lock Washer | Spring steel or stainless; grade to be confirmed | Suits M4 – M20; gap and section to be agreed | Coating to your requirement; no anti-loosening performance assumed | Dimensions, spring load, gap and surface condition |
| Self-tapping Screw | Carbon or stainless steel, heat treatment verified by sample | Diameter 3.5 – 6.3 mm; length to be agreed | Hex or pan head; thread form selected by substrate | Head form, thread, driving behaviour and coating |
| Drywall Screw | Carbon steel; heat treatment and surface data to be confirmed | Diameter 3.5 / 3.9 / 4.2 mm, length 25 – 75 mm | Coarse or fine thread, selected for timber or metal studs | Point, head, driving and breakage behaviour |
| Wood Screw | Carbon or stainless steel; grade to be confirmed | Diameter 3 – 6 mm, length 20 – 100 mm | Countersunk or pan head; drive type matched to the timber | Thread, head, pilot-hole condition and driving |
| Expansion Anchor | Steel sleeve or stud anchor; grade to be confirmed | M6 – M16; length and embedment depth to be agreed | Selected against substrate, edge distance and load | Pull-out data, dimensions, installation and substrate condition |
| Nylon Wall Plug | Nylon or other polymer; actual material to be confirmed | Outer diameter 6 / 8 / 10 / 12 mm | Matched to the screw, hole diameter and wall type | Dimensions, expansion, pull-out and ageing data |
| Blind Rivet | Aluminium body with steel mandrel, or all stainless; combination to be agreed | Diameter 3.2 / 4.0 / 4.8 mm; length to be agreed | Head style and grip range selected by sheet thickness | Grip range, setting, mandrel and material |
| Threaded Rod | Carbon or stainless steel; grade to be confirmed | M6 – M24; 1 / 2 / 3 m lengths commonly requested | Pitch, coating, cut ends and matching nuts to be agreed | Straightness, thread, length and grade |
| U Bolt | Carbon or stainless steel; grade to be confirmed | Rod M6 – M16; inside width and height to be agreed | Matched to the pipe OD; nuts and washers quoted separately | Bend dimensions, thread and completeness of fittings |
- Catatan pemilihan
- Pitch, kelas mutu, dan pelapisan dikonfirmasi sesuai pesanan, bukan dari foto.
- Pengemasan
- Kotak atau kantong dalam dengan karton luar; dihitung atau ditimbang sesuai permintaan.
NV-F01
Baut Hexagonal (Grade 8.8 Kekuatan Tinggi)
NV-F02
Baut Hexagonal (Grade 4.8 Komersial)
NV-F03
Baut Hexagonal Kekuatan Tinggi Grade 12.9
NV-F04
Baut Flensa Hexagonal (Grade 10.9)
NV-F05
Sekrup Kepala Cap Soket Hexagonal (Grade 12.9)
NV-F06
Sekrup Kepala Cap Soket Hexagonal (SS304)
NV-F07
Mur Hexagonal Gaya 1 (Grade 8)
NV-F08
Mur Kunci dengan Sisipan Nilon
NV-F09
Ring Datar
NV-F10
Ring Pegas
NV-F11
Baut Carriage (Kepala Bulat Leher Persegi)
NV-F12
Sekrup Mesin Kepala Pan Berlubang Silang
NV-F13
Sekrup Mesin Kepala Countersunk (Rata) Berlubang Silang
NV-F14
Sekrup Tapping Kepala Pan Berlubang Silang
NV-F15
Sekrup Tapping Kepala Countersunk (Rata) Berlubang Silang
NV-F16
Sekrup Drywall Kepala Bugle Berlubang Silang
NV-F17
Sekrup Self-Drilling Kepala Hexagonal (Sekrup Tek)
NV-F18
Sekrup Chipboard
NV-F19
Batang Ulir (Ulir Penuh)
NV-F20
Baut Stud Ujung Ganda
NV-F21
Baut Mata
NV-F22
Baut Angkur Ekspansi (Angkur Wedge)
NV-F23
Baut U
NV-F24
Pin Cotter (Pin Belah)
Belum ada produk yang cocok dengan filter tersebut.
Minta penawaran kontainer
Beri tahu kami pelabuhan tujuan dan kategori yang Anda butuhkan. WhatsApp adalah yang tercepat; live chat di halaman ini terhubung ke kami dengan cara yang sama.
