Арматура и соединения
Шаровые, задвижки, запорные, обратные, дисковые затворы, фильтры, счётчики и фланцы.
Что входит в группу
Типовые размеры и пункты, которые мы проверяем до расчёта. Выберите ближайшую строку — остальное уточним.
| Позиция | Материал / конструкция | Диапазон размеров | Присоединение / нагрузка | Что проверяем |
|---|---|---|---|---|
| Brass Ball Valve | Brass body; ball and seat material to be confirmed | DN15 – DN50 class; full or reduced bore to be agreed | Female or male thread, matched to the pipeline | Operation, sealing, thread and pressure/temperature data |
| Gate Valve | Brass or cast iron body, chosen by duty | DN15 – DN100 class; other sizes on request | Threaded or flanged; installation space per project | Seat, stem, sealing and operation |
| Globe Valve | Cast iron or steel construction; material to be confirmed | DN15 – DN100 class | Connection, flow direction and throttling duty to be agreed | Seat, travel, sealing and pressure test |
| Check Valve | Brass, stainless or cast iron on request | DN15 – DN100 class | Swing or lift type; installation orientation to be confirmed | Cracking pressure, backflow sealing and medium compatibility |
| Butterfly Valve | Body, disc and seat materials confirmed separately | DN50 – DN200 class | Wafer or flanged; actuation and mating flanges to be agreed | Operation, sealing, dimensions and pressure test |
| Y Strainer | Brass, cast iron or stainless on request | DN15 – DN100 class | Screen material, mesh and cleaning conditions to be agreed | Screen, flow direction, sealing and cleaning |
| Pressure Reducing Valve | Brass or other body; construction to be confirmed | DN15 – DN50 class | Inlet pressure, outlet setting and flow to be agreed | Regulation, stability, leakage and duty documents |
| Automatic Air Vent | Brass or other material; float construction to be confirmed | Connection approx. 1/2 / 3/4 inch class | Installation position, medium and temperature to be agreed | Air release, shut-off, sealing and connection |
| Angle Stop Valve | Brass or other body; surface finish to be confirmed | Connection approx. 1/2 / 3/8 inch class | Hot or cold duty; thread and outlet must be matched | Operation, thread, sealing and plating |
| Mechanical Water Meter | Metal body; measuring mechanism and wetted parts to be confirmed | DN15 / DN20 / DN25 class | Hot or cold water, installation orientation and flow class to be agreed | Reading, sealing, calibration and application documents |
| Pipe Flange | Carbon or stainless steel; grade and manufacturing method to be confirmed | DN15 – DN200 class | Pressure class, bolt pitch, face type and pipe matching | Dimensions, face, material and connection system |
| PTFE Thread Seal Tape | PTFE tape; density and compound to be confirmed | Width 12 / 19 / 25 mm; roll length to be agreed | Thread sealing; medium and service conditions to be confirmed | Width, thickness, length, tensile and seal test |
- Как выбрать
- Класс давления, среда, температура и материал уплотнения подтверждаются по позициям.
- Упаковка
- Коробка или обрешётка на единицу; защита патрубков и протоколы испытаний согласуются.
Эта группа рассчитывается по позициям, без фиксированного складского перечня. Пришлите спецификацию — подтвердим материал, размер и упаковку до заказа.
Запросить расчёт контейнера
Сообщите порт назначения и нужные категории. Быстрее всего — WhatsApp; чат на этой странице ведёт к нам тем же путём.
