Power and Construction Tools
Drills, hammers, grinders, saws, sanders, welder and pressure washer.
What this range covers
Typical sizes and the points we check before quoting. Pick the line closest to your requirement and we will confirm the rest.
| Item | Build / power | Size range | Setup / fit | Key checks |
|---|---|---|---|---|
| Electric Drill | Corded motor; chuck and gear construction to be confirmed | Rated power typically 500 – 850 W | Chuck approx. 10 / 13 mm; speed setting verified by sample | Run-out, temperature rise, switch and drilling test |
| Cordless Drill Driver | Lithium-ion platform; rated voltage and battery to be confirmed | 12 V / 18 V platform commonly requested | Battery capacity, charger and torque settings to be agreed | Chuck, torque, temperature rise and charge/discharge data |
| Rotary Hammer | Electro-pneumatic hammer; corded or battery version on request | Power, impact energy and drilling range per model | SDS-plus or other shank must match the drill bits | Impact, mode change, temperature rise and accessories |
| Angle Grinder | Motor with gear drive; guard to be confirmed | Disc diameter 100 / 115 / 125 mm | Spindle thread and no-load speed matched to the disc rating | Guard, run-out, temperature rise and switch |
| Circular Saw | Corded or lithium-ion; base plate construction to be confirmed | Blade diameter 165 / 185 / 190 mm | Max cutting depth, bore and guide accessories to be agreed | Guard, base plate, cutting and brake configuration |
| Jigsaw | Reciprocating mechanism; power platform on request | 500 – 800 W corded class commonly requested | Stroke, blade clamp and shank type must match | Blade fixing, base plate and curve cutting |
| Random Orbital Sander | Orbital drive; dust collection verified by sample | Pad diameter 125 / 150 mm | Orbit size, speed control and paper hole pattern to be agreed | Vibration, dust collection, pad and temperature rise |
| Heat Gun | Heating element with fan; temperature control to be confirmed | Rated power typically 1600 – 2000 W | Temperature range, airflow and nozzles per model | Temperature control, insulation, temperature rise and stability |
| Electric Planer | Powered planing head; cutter type to be confirmed | Planing width approx. 82 mm; other sizes on request | Depth of cut, chip discharge and guide fence to be agreed | Base plate, cutter shaft, cutting and guarding |
| Metal Cut-off Saw | Bench-type abrasive cut-off machine; motor to be confirmed | Abrasive wheel approx. 355 mm | Vice, mitre angle and workpiece range per model | Guard, clamping, squareness and cut quality |
| Inverter Welder | Inverter MMA set; process to be agreed | Output current range and duty cycle per model | Input supply, electrode and cable set confirmed together | Output, temperature rise, protection and datasheet |
| Pressure Washer | Motor with high-pressure pump; pump material to be confirmed | Rated pressure and flow per specific model | Water supply, hose, gun and couplings to be agreed | Rated versus peak pressure, leaks and running test |
- Selection notes
- Voltage, frequency, plug and accessories agreed per model; datasheet checked item by item.
- Packing
- Single-unit box or tool case; battery and accessories included only if specified.
This range is quoted item by item, with no fixed stock list. Send the specification and we confirm material, size and packing before you order.
Ask for a container quote
Tell us the destination port and the categories you need. WhatsApp is fastest; the live chat on this page reaches us the same way.
